Broken printing plates made whole
Gluing metal? You would imagine that a broken metal object would need to be welded back together. Not necessarily. These damaged printing plates were made whole using glue—though not the stuff you used in grade three.
A treasure trove of artifacts
Having recently blogged on the conservation of a 19th century printing press, it seemed appropriate to write a blog on the conservation of printing plates that may very well have been used on this press. In May 2013, the Museum acquired for its National Currency Collection more than 650 engraved steel dies (printing plates) from the British American Bank Note Company. (Read more about this acquisition.)
The print dies were in envelopes with sample prints glued to the front. Nobody had much of an idea of what condition the plates themselves were in. Die, printing, British American Banknote Co., Canada, 1905
But, we couldn’t place the dies in storage straight away. There were assessments to be made, labels to be detached and a little clean-up was called for. Each die was wiped down with mineral spirits and soft cotton swabs to remove a dark, greasy substance that covered the surfaces—evidence of their past use as security printing plates. During this cleaning process, we discovered that eight dies were broken in half, likely from past printing activity. After further evaluation, we decided to repair the breaks.
This engraving of an early coat of arms for the City of Ottawa highlights labour alongside government. Die, printing, British American Banknote Co., Canada, 1875
Prior to treatment, the plate shows a clean break. Die, printing, British American Banknote Co., Canada, 1873
Conserving the plates
Artifact preservation is the non-invasive act of minimizing and preventing future damage or deterioration. Artifact conservation has the same goal but with the addition of hands-on treatments such as cleaning and repairing.
In heritage conservation, broken metal objects can be reassembled with an adhesive most commonly used for repairing glass and ceramics. This adhesive, known as HXTAL, is a two-part epoxy resin which, through a chemical reaction, hardens after mixing. It works well with dense materials as it creates strong, tight bonds and has the added benefit of neither swelling nor discolouring over time.
HXTL is called “hextal” by conservators. Unlike the two-part epoxy from the hardware store, HXTAL is a very thin liquid.
No, the plates weren’t taped together; just held together while the adhesive cured.
Each die was reassembled, held together with thin strips of painter’s tape and then placed upright in clamps. Small drops of HXTAL were then applied along the break with the tip of a wooden stick. Capillary action then draws the glue into the break. The next day, any remaining adhesive was removed with swabs and wooden sticks lightly dampened with acetone. This is important because after 24 hours, HXTAL will become too hard to be removed without the potential of damaging the object. The dies were then left in the clamps for an additional week until the adhesive had fully cured. The final step was to create custom mounts for each die to ensure they are properly supported while in collection storage.
The plates may now be re-assembled, but could never be used for printing again.
It is both our pleasure and our duty to preserve items such as these dies for the future. They are a glimpse into our economic and social history as well as into printing traditions that reach back nearly 600 years.
We want to hear from you! Do you have an idea for a blog post you’d like to see?
Content type(s):
Blog posts
August 6, 2014
For much of their history, Canadian bank notes have represented a promise, a guarantee that they could be redeemed for “specie” (gold and silver coins) at their parent institution.
The Senior Deputy Governor’s Signature
By: Graham Iddon
Content type(s):
Blog posts
July 28, 2014
Suppose you walk into a bar frequented by currency collectors and in an attempt to join in you refer to a ‘planchette’ as a ‘rosette’ (beer mugs hit the tables and the pianist stops playing). This could be pretty humiliating and you’ll probably never be able to go to that bar again, at least not on numismatic night.
Becoming a Collector V
By: Graham Iddon
Content type(s):
Blog posts
July 21, 2014
Now that you have a grasp of preservation techniques for coins, you might want to familiarize yourself with the finer points of their anatomy. It is all part of your numismatic education and besides, you need to be informed and sound informed when you are buying coins at flea markets or coin fairs.
Becoming a Collector IV
By: Graham Iddon
Content type(s):
Blog posts
July 7, 2014
Though naturally we are aware that the former Museum space is being gutted, the reality of seeing it empty is still pretty strange for most of us here. In the last blog of this series we showed you the empty cafeteria space that will become the new Museum, as well as some images of the old Museum as it was at the time: stuffed with odds and ends of exhibit cases, the occasional display still on the walls.
Museum Reconstruction - Part 3
By: Graham Iddon
Content type(s):
Blog posts
June 23, 2014
With all the blogging we’ve been doing for Voices from the Engraver, you’d think we had nothing else on our exhibition plate. We do, actually, and it’s called CENTimental Journey. This temporary exhibition, hosted at the Canadian Museum of History, walks you through more than 150 years of the Canadian 1 cent piece.
CENTimental Journey
By: Graham Iddon
Content type(s):
Blog posts
June 16, 2014
We are coming up on a year since we closed the doors on the physical museum. During that year, we’ve worked very hard to make sure everybody knows that we are still a functioning museum and one that will be opening its doors again in a few years on a beautiful new space, with an expanded mission and mandate.
Museum Reconstruction - Part 2
By: Graham Iddon
Content type(s):
Blog posts
