Tender loving care for a significant artifact
It’s not all currency. The Museum holds 1000’s of items related to the business of making money—literally. The addition of a 19th-century printing press to the vaults presented some unusual challenges to the collections team.
A venerable printing firm donates its history
In 2012, the Ottawa-based security printing firm BA International closed. Formerly the British American Bank Note Company, BA had been printing bank notes, passports, bonds and other secure documents since before Confederation. With this closure came an opportunity for the Museum’s National Currency Collection (NCC) to acquire objects that showcase the production processes used by BA and other security printers. Luckily, one of the pieces offered to us was a large production tool known as a spider press.
A 500-year-old tradition
Used extensively in the 19th century, this type of hand-operated press printed secure financial documents using the intaglio method. Intaglio literally means carving, and initially, an image would indeed be carved (engraved) into a soft steel plate. This plate would be coated in ink and wiped with a cloth to remove the ink from the non-engraved surfaces. It was then placed on the press underneath a clean sheet of paper. The press operator would turn the machine’s hand wheel, rolling the plate-and-paper combo between two large, heavy cylinders. The pressure of the cylinders would push the paper into the ink-filled areas, leaving a raised print on the paper. The multiple spokes of the hand wheel, reminiscent of the legs of a spider, gave rise to the name “spider press.”
The press is stored on a pallet and moved with a hydraulic jack. It takes four strong people to shift it even a few centimetres.
The Devil is in the humidity
When our BA spider press arrived in 2013, we discovered it had been exposed to a greater amount of moisture than expected. The result? A coating of bright orange corrosion had blossomed over all the exposed steel surfaces. As well, years of use had left crusts of dust, dirt and grime embedded in the crevices of the machinery.
As it was not intended to go on display immediately, we decided to treat the spider press before it went into storage at the Museum. The goal was to reverse as much of the damage as possible and hopefully prevent further active corrosion from appearing.
Gentle treatment for a heavy machine
After several spot tests, we decided that the corrosion should be removed with extra fine steel wool followed by gently wiping the surface with soft cloths and alcohol. The embedded dirt and grime was then removed with cotton swabs lightly dampened with mineral spirits. Finally, a thin layer of machine oil was applied to all the metal surfaces to act as a protective coating.
The original surface can be seen in the upper cylinder while the corrosion is being removed during treatment.
A fresh coating of machine oil was applied to protect the surface. This also has the added benefit of allowing the machine to function smoothly.
Putting the spider press to bed
Once the press was moved back into storage, it was sealed in a tent of polyethylene sheeting along with packs of moisture-absorbing silica gel. This created a drier micro-climate around the press. The condition of the spider press will be monitored as it remains in storage, making sure this valuable artifact will be around for generations more.
With the treatment fully complete, the rolling bed was re-installed between the upper and lower cylinders and the press photographed for the database.
Stay tuned for a further blog on the conservation of some of a large collection of intaglio printing plates obtained along with this press.
We want to hear from you! Do you have an idea for a blog post you’d like to see?
Content type(s):
Blog posts
January 22, 2015
On this trip, we were all excited to see the 8-foot-tall wooden panels with the full copy printed directly onto them. Using a new process, staff of the exhibition fabrication department at the Sherbrooke Nature and Science Museum have produced some very impressive results.
The Adventure of Exhibit Planning VIII
By: Graham Iddon
Content type(s):
Blog posts
January 14, 2015
An exhibition fabrication company was finally selected by the Museum to produce the upcoming “Voices from the Engraver” travelling exhibition. It’s all very exciting.
The Adventure of Exhibit Planning VII
Content type(s):
Blog posts
December 15, 2014
The recent additions to the National Currency Collection described below are from very different parts of the world and are between 1500 and 2500 years old.
New Acquisitions
By: Raewyn Passmore
Content type(s):
Blog posts
November 28, 2014
The commemorative 1951 5 cent piece was issued to mark the 200th anniversary of the naming of nickel and its isolation as an element. Recently, I had the great pleasure to participate in the Big Nickel anniversary festivities and give a talk about the design competition for the 1951 5 cent coin.
The Big Nickel
By: Paul S. Berry
Content type(s):
Blog posts
November 6, 2014
This is not the time for ‘nay sayers’. Basically, we planned a luxury car knowing that when all was said and done, it was going to be a very nice family sedan (maybe with the big engine?).
The Adventure of Exhibit Planning VI
By: Graham Iddon
Content type(s):
Blog posts
September 29, 2014
Now the writer takes a deep breath and attempts to take a subject like the ‘representation of 75 years of national identity as depicted on stamps and bank notes’ from 50 pages of research and squash it into 65 words.
The Adventure of Exhibit Planning V
By: Graham Iddon
Content type(s):
Blog posts
